Our Florida Technical Staff Has Hands-On Experience Working With a Wide Range of Electrical and Mechanical Instruments. We Provide Quality Service and Support You Can Rely On

Electrical Test Instruments, LLC DBA ETI Precision (ETI) is a leader in the calibration and repair of test and measurement equipment, specializing in high-current and high-voltage instruments.

We provide onsite services in Florida region, minimizing the downtime of your critical instruments by offering calibration services at your facility. Our NIST-traceable calibration services encompass a wide variety of electrical, mechanical, radio frequency (RF), pressure, physical-dimensional, and environmental instrumentation. For more information https://etiprecision.com/calibration/

We are an ISO 9001:2015-certified, ISO/IEC 17025:2017-accredited, and ANSI/NCSL Z540-1-1994-accredited calibration laboratory. We offer MIL-STD-45562A-compliant calibrations and calibrations in accordance with 10 CFR Part 21 and 10 CR Part 50 Appendix B upon request.

Contact us today
Email: info@etiprecision.com
Phone: 410-857-1880

Just some of the products and services we offer our Florida customers:

  • Calibration of Test & Measurement Equipment
  • Torque Wrench Calibration
  • Oscilloscope Calibration
  • Thermocouple Calibrator Calibration
  • Sound Level Meter Calibration
  • DLRO Calibration
  • Process Calibrator Calibration
  • Digital Multimeter Calibration
  • IR Thermometer Calibration
  • Temperature Probe Calibration
  • Stopwatches & Timers
  • Frequency Counter Calibration
  • Ammeter & Shunt Calibration
  • Calibration of High Current – High Voltage Equipment:
  • Earth Ground Tester Calibration
  • Current & Potential Transformers
  • Megohmmeter Calibration
  • Power Quality Analyzer Calibration
  • Relay Test Set Calibration
  • Primary Injection Test Set Calibration
  • AC and DC voltages above 100kV
  • High Voltage Detector Calibration
  • Hipot Tester Calibration
  • Single & Three Phase TTR Calibration
  • Power Supply Calibration
  • Secondary Test Set Calibration

Read More...

On This Page

ETI is a Premier Provider of NIST-Traceable Calibration Services for Electrical Test Equipment in and around Florida

ETI provides NIST-traceable calibration services for a variety of electrical test equipment, including circuit breaker testers, DLRO’s, electrical clamps, meghommeters, multimeters, oscilloscopes, power analyzers, power factor test sets, power supplies, recloser test sets, and everything in between. We offer onsite calibration support services at our customers’ locations in Florida and also in-house service at our calibration lab. Our on-site calibration customers in Florida experience same-day turn-around of their test equipment at their own facilities with marginal downtime. Our internal calibration service ensures fast industry-leading turnaround times of 5 to 8 business days, with an expedite service available to return your company’s equipment to Florida as soon as possible. ETI is an ISO 9001:2015-accredited calibration laboratory that is ANSI/NCSL Z540 and 10 CFR Part 50 Appendix B compliant. Fortune 500 companies, universities, nuclear energy facilities, electrical testing businesses, data centers, utilities, electrical contractors, and municipalities of various sizes and shapes in Florida count on ETI to manage their electrical test equipment calibration programs.

ETI is a Reputable Supplier of NIST-Traceable Calibration Services for Mechanical Instruments in Florida

ETI specializes in NIST-traceable calibration services for a wide array of mechanical measuring and test equipment, including IR cameras, air pressure meters, calipers, micrometers, oil pressure meters, stop watches, torque wrenches, infrared inspection equipment, tachometers, temperature meters, pressure controllers, plus everything in between. We provide both onsite services at our customers’ business locations in Florida and also in-house service at our calibration laboratory. Our onsite customers in Florida appreciate same-day turnaround of their equipment at their private facilities with hardly any downtime. Our internal calibration service supplies fast best completion times of five to eight business days, with a speed-up service offered to restore your equipment to Florida as soon as possible. ETI is an ISO 9001:2015-accredited calibration laboratory that is ANSI/NCSL Z540 and 10 CFR Part 50 Appendix B compliant. Acceptance testing businesses, Fortune 500 companies, nuclear energy facilities, utilities, data centers, universities, municipalities, and electrical contractors of all sizes and shapes in Florida rely on ETI to take care of their measuring instrument and mechanical test calibration programs.

Repairing Electrical and Mechanical Test Equipment for Florida Facilities

ETI services all major brands and models of electrical testing instruments. Regardless of whether your Florida facility’s instruments have been in operation for decades or are brand new, our broad repair capabilities can lengthen the lifespan of your most important testing equipment. ETI’s maintenance and repair support services include clamp-on meters, power quality meters, oscilloscopes, lab instruments, power analyzers, digital instruments, frequency counters, switchboard meters, analog instruments, multimeters, panel meters, and a variety of additional mechanical and electrical test equipment. All of our repairs include NIST-traceable calibration of your instruments, comprehensive documentation, competitive rates, and a swift turnaround. Florida facilities count on ETI to minimize their down time and fix their critical test instruments.

Electrical Test Intrument’s Circuit Breaker Testing Equipment is Used by Testing Companies as well as Industrial Facilities Around The Country

ETI manufactures and sells trusted electrical test equipment. Our Professionals specialize in circuit breaker testing instruments, which include circuit breaker test sets and power supplies. We are also the United States reseller and service center for the entire line of Metrel electrical test instruments and products.

Our line of top quality low voltage high current circuit breaker test sets cater to the whole spectrum of electrical testing companies’ requirements. Our primary injection circuit breaker testers range from 250A to 6,000 A continuous output, with immediate testing capabilities up to 60,000 A. Our PI-250B, PI-800, and PI-1600 test sets are modular, portable, durable, and lightweight while at the same time outperforming competing products’ capabilities at their price points. Our stationary PI-2500, PI-4000B, PI-5000, and PI-6000 circuit breaker test sets also best the market in capabilities and reliability for high current circuit breaker testing. All Electrical Test Instrument circuit breaker testers feature our leading edge MAC-21 controller, which is a self-contained microprocessor-based metering and control package for primary injection testing. Additionally, we retrofit other manufacturers’ circuit breaker test sets with our MAC-21 controller:

  • expanding their capabilities,
  • extending their useful lives,
  • and revamping the circuit breaker testing capabilities of our highly valued clients.

ETI’s high-quality power supplies are light-weight, durable, and reliable. Our products are capable of outputting 7.2 A to 20A continuous at 140 VAC. ETI’s power supplies are ideal for circuit breaker charging motor testing.

As the U.S. reseller and authorized service center for Metrel products, ETI is truly a one-stop answer for electrical testing companies’ instrument requirements. We support and sell the full line of Metrel offerings, such as meghommeters, DLRO’s, and power analyzers. Our annual repair services and calibration programs on every product we build and sell make ETI the go to partner of hundreds of electrical testing companies, Fortune 500 companies, utilities, data centers, universities, and municipalities countrywide.

Calibration and Repair Services in Florida
410-857-1880
info@etiprecision.com

About Florida

A South-eastern Region state in the USA, Florida has a population of 21,477,737. Tallahassee is the state capital and Jacksonville is the most populous city. Other prominent cities are Miami, Orlando, Tampa, and more. Florida has a long coastline and is known for its beaches and beach parties. It is a great tourist destination and offers much to the visitors apart from this. It is called the world’s Theme Park Capital with Cyprus Gardens its first amusement park here. Oranges and citrus fruits have made Florida famous with the highest production of orange and grapefruit juice. It is referred to as the Sunshine State. It is home to the Kennedy Space Center NASA’s launch center. Everglades an ecosystem is exclusive to Florida. Here some endangered plant and animal species thrive. St Augustine has the world’s oldest buildings. NASCAR and Gatorade were born here and so were suntan lotion and air-conditioning.

Are you new to Florida? Check out these local favorites:

Related Florida Calibration & Repair Searches

  • calibration laboratory near me Florida
  • electrical test equipment in Florida
  • Florida calibration services
  • electronic instrument calibration Florida
  • mechanical instrument calibration in Florida
  • Florida instrument repair services
  • mechanical instrument repair Florida
  • NIST traceable calibration in Florida
  • Florida calibration facility near
  • air & oil pressure meters Florida
  • vacuum gauges in Florida
  • Florida electronics store
  • electrical test meter calibration Florida
  • pressure controllers & recorders in Florida
  • Florida temperature chambers & controllers
  • breaker test set Florida

ETI Precision – Electrical Test Instruments supports customers in Florida, including the following city: Jacksonville. Click here to return to our USA service page.


Electrical Test Instruments, LLC
8430 Spires Way, Suite A
Frederick, MD 21701


Phone: 410-857-1880
Fax: 410-857-1387
Email us

© 2020 ETI Precision | Opus Design – Boston Web Design

/**/